Una valla o barrera de contención puede estar presente cerca a la trayectoria de un objeto en movimiento, donde particularmente existe la probabilidad de que se pueda efectuar una colisión y daño relativamente significante dado su masa y velocidad referente a su contorno. Puesto que en la práctica, existen distintas formas de absorber un golpe, ya sea esto por medio de diseños intencionales o sobre objetos de la naturaleza, las propiedades de los materiales involucrados en la colisión son de gran importancia en referencia al evento, y ultimadamente, a los resultados.

Leer el artículo completo en Wikipedia · CC-BY-SA

Traffic barriers (sometimes called crash barriers, or Armco barriers, also known in North America as guardrails or guard rails and in Britain as crash barriers) keep vehicles within their roadway and prevent vehicles from colliding with dangerous obstacles such as boulders, buildings, walls or large storm drains. Traffic barriers are also installed at the roadside to prevent errant vehicles from traversing steep (non-recoverable) slopes or entering deep water. Traffic barriers are installed within medians of divided highways to prevent errant vehicles from entering the opposing carriageway of traffic and help to reduce head-on collisions. Some of these barriers, designed to be struck from either side, are called median barriers. Crash barriers can also be used to protect vulnerable areas like school yards, pedestrian zones or fuel tanks from errant vehicles. While barriers are normally designed to minimize injury to vehicle occupants, injuries do occur in collisions with traffic barriers. They should only be installed where a collision with the barrier is likely to be less severe than a collision with the hazard behind it. Where possible, it is preferable to remove, relocate or modify a hazard, rather than shield it with a barrier. To make sure they are safe and effective, traffic barriers undergo extensive simulated and full scale crash testing before they are approved for general use. While crash testing cannot replicate every potential manner of impact, testing programs are designed to determine the performance limits of traffic barriers and provide an adequate level of protection to road users.

Leer el artículo completo en Wikipedia · CC-BY-SA